LeetCode p463 Island Perimeter 题解

1.题目：

You are given a map in form of a two-dimensional integer grid where 1 represents land and 0 represents water. Grid cells are connected horizontally/vertically (not diagonally). The grid is completely surrounded by water, and there is exactly one island (i.e., one or more connected land cells). The island doesn’t have “lakes” (water inside that isn’t connected to the water around the island). One cell is a square with side length 1. The grid is rectangular, width and height don’t exceed 100. Determine the perimeter of the island.

Example:

[[0,1,0,0],
[1,1,1,0],
[0,1,0,0],
[1,1,0,0]]

Answer: 16
Explanation: The perimeter is the 16 yellow stripes in the image below:

LeetCode p67 Add Binary 题解

1.题目：

Given two binary strings, return their sum (also a binary string).

For example,
a = “11”
b = “1”
Return “100”.

LeetCode p475 Heaters 题解

1.题目：

Winter is coming! Your first job during the contest is to design a standard heater with fixed warm radius to warm all the houses.

Now, you are given positions of houses and heaters on a horizontal line, find out minimum radius of heaters so that all houses could be covered by those heaters.

So, your input will be the positions of houses and heaters seperately, and your expected output will be the minimum radius standard of heaters.

Note:
Numbers of houses and heaters you are given are non-negative and will not exceed 25000.
Positions of houses and heaters you are given are non-negative and will not exceed 10^9.
As long as a house is in the heaters’ warm radius range, it can be warmed.
All the heaters follow your radius standard and the warm radius will the same.
Example 1:
Input: [1,2,3],[2]
Output: 1
Explanation: The only heater was placed in the position 2, and if we use the radius 1 standard, then all the houses can be warmed.
Example 2:
Input: [1,2,3,4],[1,4]
Output: 1
Explanation: The two heater was placed in the position 1 and 4. We need to use radius 1 standard, then

LeetCode p476 Number Complement 题解

1.题目：

Given a positive integer, output its complement number. The complement strategy is to flip the bits of its binary representation.

Note:
The given integer is guaranteed to fit within the range of a 32-bit signed integer.
You could assume no leading zero bit in the integer’s binary representation.
Example 1:
Input: 5
Output: 2
Explanation: The binary representation of 5 is 101 (no leading zero bits), and its complement is 010. So you need to output 2.
Example 2:
Input: 1
Output: 0
Explanation: The binary representation of 1 is 1 (no leading zero bits), and its complement is 0. So you

LeetCode p485 Max Consecutive Ones 题解

1.题目：

Given a binary array, find the maximum number of consecutive 1s in this array.

Example 1:
Input: [1,1,0,1,1,1]
Output: 3
Explanation: The first two digits or the last three digits are consecutive 1s.
The maximum number of consecutive 1s is 3.
Note:

The input array will only contain 0 and 1.
The length of input array is a positive integer and will not exceed 10,000

LeetCode p492 Construct the Rectangle 题解

1.题目：

For a web developer, it is very important to know how to design a web page’s size. So, given a specific rectangular web page’s area, your job by now is to design a rectangular web page, whose length L and width W satisfy the following requirements:

1. The area of the rectangular web page you designed must equal to the given target area.

2. The width W should not be larger than the length L, which means L >= W.

3. The difference between length L and width W should be as small as possible.
   You need to output the length L and the width W of the web page you designed in sequence.
   Example:
   Input: 4
   Output: [2, 2]
   Explanation: The target area is 4, and all the possible ways to construct it are [1,4], [2,2], [4,1].
   But according to requirement 2, [1,4] is illegal; according to requirement 3, [4,1] is not optimal compared to [2,2]. So the length L is 2, and the width W is 2.
   Note:
   The given area won’t exceed 10,000,000 and is a positive integer
   The web page’s width and length you designed must be positive integers.

   阅读全文 »

LeetCode p111 Minimum Depth of Binary Tree 题解

1.题目：

Given a binary tree, find its minimum depth.

The minimum depth is the number of nodes along the shortest path from the root node down to the nearest leaf node.